TP-Link extender setup issues can be difficult to resolve, especially when you have limited knowledge of how to go about things. If you are a beginner at the TP Link WiFi extender setup process and are facing issues while performing it, we are here to assist you. Here, in this post, we have summed up some of the most common issues that you might be struggling with while setting up your device along with their relevant solutions. Read on.
How to Fix TP-Link Extender Setup Issues?
Issue: Power LED Blinking Red
Solution: One of the most issues that you might have came across while performing TP Link extender setup is the blinking of the power LED. You might be facing this issue because the wall socket you are currently using is damaged.
Therefore, consider opting for any of the following options:
- Get the wall socket your device is plugged into fixed.
- Consider plugging your TP-Link range extender into a different wall socket.
Issue: Extender Not Connecting to Router
Solution: If you are facing issues while connecting your TP-Link extender to the host router, it can be because of two reasons:
- The distance between your devices is too much for their own good.
- The connection source used to connect your extender and router is not reliable.
To troubleshoot the issue, unplug your extender from the wall socket it is currently plugged into and plug it into the one located near your home router. Additionally, if you have used an Ethernet cable to connect your devices, ensure that it is not worn out or damaged. In case it is, consider connecting your devices using a wireless source.
Note: The connection between your wireless devices should be finger-tight at all costs.
Issue: Unable to Login to Extender
Solution: Experiencing issues while trying to access the TP Link extender login page? Well, follow the hacks mentioned below to successfully log in to your device:
- Make sure that you are typing the correct web address in the address bar of your web browser. Avoid typos while doing so. Also, cross-check the entered web address before pressing the Enter key.
- Do not type the default web address in the search bar of your web browser.
If you are still facing issues while trying to access the TP-Link extender login page, consider using the default IP address instead of the web address.
Issue: Can’t Access Quick Setup Wizard
Solution: Not being able to access the Quick Setup wizard can trouble you if you weren’t being careful enough while typing the default username and password.
By any chance, you are not sure about the default login credentials, refer to the user manual. But, do not enter false details.
Bonus Tip
If you are facing performance-related issues right after performing TP-Link extender setup, it might be because of WiFi interference. Chances are that you have placed your extender near transmitting appliances, reflexive surfaces, metal objects, and electronic devices.
Thus, relocate your wireless range extender and make sure that it is not kept near any of the following things:
- Cordless phones
- Washing machines
- Baby monitors
- Bluetooth speakers
- Treadmills
- Televisions
- Mirrors
- Fish tanks
- Refrigerators
- Microwave ovens
- Corners
- Concrete walls
Additionally, do not place your extender near utensils or objects containing water. Else, the signals of your TP-Link wireless range extender won’t be spared.
Summing Up
We wrap our guide to troubleshoot TP-Link extender setup issues. We expect that after following the troubleshooting hacks mentioned in this post, you will successfully be able to set up your device. If you do, don’t forget to share your feedback with us via the comment section. We would love to know that we could be of some help to you.
