Before you begin the process of installing new siding on your home, you should first make sure that the exterior door and window trims are in place. Also, you should sheath the walls with insulation before starting the actual installation. The first piece of siding should be at least 1/2-inch shorter than the distance between vertical trim pieces, measured from the inside surfaces of the channels. Nail the first piece of vinyl siding in place so that the bottom lip hooks under the starter strip.
Before beginning the installation, you should clear your driveway and move outdoor furniture and equipment. Ensure that any interior items are removed or stored, as they may be damaged. In addition, homeowners should remove all interior items from the home to prevent damage from the siding. Before letting the contractor work on your home, ask them to answer the following five questions. When they answer your questions, you should feel comfortable with their answers to these questions. In addition to asking them these five important issues, you should also ask them to show you their experience and how long they have been doing the job.
Installing New Siding
Next, determine how much siding material you need. When installing new siding, remember to allow for waste. To avoid extra cost, be sure to get an estimate from multiple contractors. While most estimates include waste materials, you can also add a small allowance to your project to account for any leftover siding material. For example, you may want to allow for a quarter-inch gap between the corner posts and the siding panels. However, if you live in an area where it gets very cold, you can get away with a smaller gap.
Before the siding installation process begins, homeowners should clear the driveway to allow workers to access it. They should also clear the area around the home so that they can work without having to dodge debris. When the work begins, it is important to ensure that children are not near the work site. After the project is complete, the contractor will likely need to install downspouts, shutters, and caulking. If there are any gaps around the windows or doors, you can prepare these with flashing tape or caulk.
Before siding installation, homeowners should make sure that their driveway and outdoor furniture are clear. Additionally, it is a good idea to remove any interior items such as carpets, rugs, and other objects, since the siding will be a permanent fixture. There are five basic steps to siding installation, and they’re all important. Aside from following the guidelines, siding contractors should also take care of the exterior of the home. This way, they can avoid causing additional damage and preventing accidents.
Siding Installation Contractors
When the siding installation is completed, homeowners should clean the area well. They should remove outdoor furniture and equipment, and they should remove any interior items that may get damaged by the new siding. A siding installation is a complicated process, so homeowners should make sure they hire a professional only after thorough research. Aside from the right contractor, homeowners should ask the following five questions to make sure that they’re getting the best value for their money. These questions will help you choose the best contractor for the job.
Once the siding is installed, homeowners should prepare the area by removing loose debris and preparing it for siding installation. Using a straightedge, a level, homeowners should line up the siding to ensure that the edges of the house are straight. They should also remove any downspouts, shutters, and caulking. The old exterior siding must be removed and this can cause a temporary mess. A professional siding contractor will have a plan for removal and replacement of the old siding.
After the exterior wall trim is done, the interior walls of the home may shake a little bit. Then, they should be wiped clean and free of debris. A contractor will bring a dumpster and clear the area. They should also be able to work around windows and doors. They should also be careful to protect neighbors. After the exterior siding is complete, the homeowner should seal the gaps around the windows and doors. There should be no gaps above the sill trim.