Washing your motorcycle is one of those things that seem so simple, but if you have a dirty bike, it can be a real challenge. It can be difficult to get all the soot, tar, crud off your bike because it’s so hard to get all the dirt and grime off. But before you despair, check out this guide to washing your motorcycle.
Step 1: Get your cleaning supplies together
Best Motorcycle cleaning products is an often neglected task, especially when you consider how many miles you put on your bike. But, consider cleaning your bike regularly, it will only help you to feel better. It gives you that feeling of pride that you’ve taken care of your bike. It gives you that feeling of accomplishment that it looks great after just a wash. It gives you that feeling of pride that your bike is not caked with dirt on the garage floor. It gives you that feeling of accomplishment that your bike is cleaner than ever.
Step 2: Get your work area in order
In the beginning, there was a bike. It was a standard bike. And then came one day when the bike decided it wanted to be a little bit better, a little bit cleaner. And so, it started cleaning itself.
Step 3: Plug exhaust holes
This step in the process is easy enough, but the bikes in question are often really dirty. You may even need to wet sand the porous surface of the motorcycle to get the worst of the grime off. If so, wet sanding it with fine sandpaper will help get the surface looking good again.
Step 4: Give the motorcycle a quick spritz
Have you ever tried cleaning your bike’s air filter? It may seem like a simple task, but it’s actually quite difficult. The air filter cartridge is surrounded by hundreds of tiny crevices that trap dirt and debris, so first you have to break apart the dirt or grease particles so they can be washed away. If you skip this step, the dirt will just get re-trapped on the next time you go out.
Step 5: Suds up your motorcycle
One of the more annoying aspects of maintaining a motorcycle is the fact that you’ll often need to wash it at least once a week. This is because, in addition to constantly getting dirty, the things we do on our motorcycles — like how we ride — can cause tiny and hard-to-see (but even more annoying) bits of dirt and grime to accumulate on the inside and outside of the motorcycle.
Step 6: Rinse your motorcycle
You’ve washed your motorcycle, you’ve dried it, you’ve even washed it again, but it still has a funky smell. Maybe it’s something in the water? No, wait. It’s the dirt in the air. Or most likely, it’s the grime that has accumulated on your motorcycle’s surfaces over years of use.
Step 7: Dry the motorcycle
Now that you have washed your motorcycle using the cleaning methods outlined so far, you will want to dry it. If you are drying the bike out on the driveway, you will want to use a large tarp or other waterproof tarp to do so. If you are drying it outside, you will want to use an electric fan to speed up the drying process. If you are drying it with a small tarp, you will want to make sure that the tarp is completely dry before storing the bike – else the bike could harbor moisture and rust.
Step 8: Re-lube the motorcycle chain
A lot of motorcycle owners are concerned about the condition of their motorcycle chain, but most are unclear on what to do about it. When the chain gets too tight, it can cause serious damage to your motorcycle. So, how do you know when to replace your motorcycle chain? While it is not a common maintenance item, having your chain inspected regularly is a good preventative measure.
Step 9: Waxing a motorcycle
It’s time for the final step in the washing process. This is the most important one, as it will determine how the next part of the process will finish. Waxing is a process that takes off the worst parts of the paintwork by removing the top layers of paint. This part is done mostly with wax, which is a substance that you can buy in any good automotive store. It is applied using special tools, pieces of cloth or pieces of paper you can use to apply the wax.
Use Two Different Buckets of Water
There are a lot of ways to wash a motorcycle, but there are only a few that are great. We suggest that you use a bucket of water and a bucket of a special soap that you can buy at a motorcycle shop. We recommend a product called “Buckets of Water,” a good motorcycle soap, and a towel. First, put a little bit of water in a bucket, then add the soap. Put the motorcycle in the bucket for a few minutes, then take it out. Do this one more time. Then take the motorcycle out of the bucket, then use the same bucket to rinse the motorcycle. You can put the motorcycle in the bucket for another minute or two to get all the water off.
Click Here: Earthhershop