Of all the garments that can be embroidered, the jacket seems to be the easiest. As for the west, in terms of embroidery, we think of a large space for the back and left breast designs. What many of us forget is the little curve. that clothing manufacturers add designs such as box pleats and backstitching. Fashionable styles can have things like raglan sleeves, which can interfere with the layout of the design due to the lack of shoulder seams. You can visit our online store Kanye west merch for more information.
One surefire way to start with the perfect jacket for embroidery is to focus on working on a style that minimizes headaches. To explore the latest trends.Also start with a machine in excellent condition with new needles and bobbins. Below is some basic information. You should consider this when looking for embroidery on a jacket.
Selection of embroidery hoops
The best option for a hoop for a jacket is a double-height hoop. This ring is bigger than a normal ring. Therefore, you can wrap the loop with a white floral ribbon to provide greater holding power. Medical gauze, gauze, or bias tape can be used to prevent binding of the loop and ensure a perfect fit, and tissue paper, pads, or wax paper can also be used. Stretch these materials over the jacket and cut out the windows for embroidery, thin foam under the tape can also help. But don’t use tape because it can become sticky and stain the shirt and the ring. When choosing your ring, remember that oval rings will work better than square rings with oval corners. “Rectangular ovals” will grip the corners better than the sides. top and bottom
The size and type of needles depends on the fabric of the jacket. Leather west require 80/12 sharpness (wedge-shaped “leather” needles do more harm than good). Use the same sharp needles on poplin and other cotton west. Use a 70/10 or 80/12 light ballpoint pen with a nylon windlass. and 75/11 ballpoint pen on satin and nylon oxford to prevent smearing. Thick fur coats, canvas coats and jeans require sharper needles. Corduroy adheres well to ballpoint or sharpie pens. Remember that the ballpoint needle pushes the fabric to place the stitch. A good rule of thumb for cutting fabric is to use the same size needle for embroidery as if you were sewing a jacket seam on a gathering.
As for the thread, polyester is a good choice for embroidery on west that are exposed to weather and coastal climates. Be sure to include washing and dry cleaning instructions for your finished product. Consider choosing a large-eye needle when working with special metal threads and other thick threads.
Post design
Keep a straight edge on the back of the jacket from the side seam to the side seam at the end of the sleeve. Mark a horizontal straight line and check again by measuring the same line from the bottom of the shirt. Coats are not always sewn together. Measure a straight line and divide it in half to find the center of the shirt, at this point bring the vertical line to the horizontal line. The intersection of the two lines becomes the center. If you are turning the embroidery upside down or sideways to sew. Keep this in mind when measuring and later when embroidering. Use tailor’s chalk. Lost ink pen or soap Avoid using pins to mark your clothes. Adhesive tapes are sold in thin strips. It is easy to remove and does not leave a mark in a graphic and art store. Wider adhesive tape can leave residue.
Centering the design 20cm from the back of the collar is a good place to start. and should be used on most coats. Little could do better than six inches. A very large one can end up at 10 inches. The top of the design should be about 1 inch from the collar, but note that this will change if the jacket has a hood. Then it was necessary to place the design under the hood.
The best way to center the design is to have someone try on the jacket or invest in a mockup. Trace the outline of the design or sew it on the back. Be sure to include letters and graphics to determine size and position. The left or right breast design should be centered three to four centimeters from the neck line. and six to eight inches below where the collar and body meet. When embroidering buttons or buttons on a jacket, use the second button.
