Troubleshooting Guide to Fix Netgear Orbi Blue Light Issue

Are you struggling with the Netgear Orbi blue light issue? Well, worry not. You aren’t the only one who’s stuck with this issue. Users all across the globe have reported that they see a blinking blue light on their Netgear Orbi routers. We’ve helped many. We’ll help you too. So, keep reading this post and learn about the various troubleshooting tips through which you can fix the Netgear Orbi blue light issue in the blink of an eye.

Fixed: Netgear Orbi Blue Light Issue

Reboot Your Orbi Router

Before you do anything else, reboot your Netgear Orbi router. One of the major reasons why you’re facing the Netgear Orbi blue light issue is because technical glitches. And rebooting your device will help you get rid of these glitches.

Thus, follow the steps mentioned below and learn how to reboot your Netgear Orbi:

Disable every WiFi-enabled device connected to the network of your Orbi.
Power off your Orbi device and unplug it from the wall socket.
Wait for some time.
Plug your Netgear Orbi router back into the wall socket.
Do not forget to turn it on.

Now, check whether you are able to get rid of the Netgear Orbi blue light issue. If not, then continue reading this article.

Perform Orbi Firmware Update

An outdated firmware can also be the reason why you’re experiencing the Netgear Orbi blue light issue. To troubleshoot it, it is recommended that you update the firmware of your Orbi to the latest version right away.

Here are the guidelines that will help you perform Netgear Orbi firmware update:

Switch on your laptop.
Open an internet browser on your system.
In the address of the internet browser, type orbilogin com, and press the Enter key.
You will get welcomed by the Netgear Orbi login page.
Enter the default username and password and click Log In.
On the BASIC Home screen, head over to the Settings option.
Click Administration and select Firmware Update.
Now, follow the on-screen instructions.

In this manner, you will be able to perform Netgear Orbi firmware update with ease. If you are still not able to fix the Orbi blue light issue, give the last troubleshooting hack a try.

Reset And Reconfigure Your Orbi

If nothing has worked for you so far in troubleshooting the Netgear Orbi blue light issue, then is is highly advised that you restore your device to the factory default settings.

Follow the instructions outlined below and learn how to reset your Orbi wireless device:

Check all sides of your Orbi and locate the Reset button.
Get a paper clip or any other sharp object and press the Reset button carefully.
Wait for a couple of seconds.

That’s it. Once you are done restoring your Orbi to the factory default mode, it is suggested that you reconfigure your device.

Here’s how you can reconfigure your Netgear Orbi wireless device:

Plug your Netgear Orbi router into a working wall outlet and turn it on.
Wait for the power LED to become solid green on your device.
Next, connect your Orbi router to the existing modem using a cable.
You also have the choice of connecting your devices wirelessly.
Then, power up your Netgear Orbi satellite and sync it with the Orbi router.
To do so, press the Sync button on both your Orbi devices and wait for some time.
Turn on your computer and log in to your Netgear Orbi.
Access the Netgear Orbi setup page and follow the on-screen prompts.

In this way, you’ll be able to reconfigure your Netgear Orbi wireless device without any hassle.

Sum Up

We hope that the troubleshooting tips mentioned in this article helped you get rid of the Netgear Orbi blue light issue. If they did, don’t forget to leave a word of appreciation in the comment section.